Arduino TinyDuino TinyCircuits kit solder TinyLily TinyShield fun education LED
Enter a product name
This panel meter displays the temperature of the attached waterproof 1% thermistor in °C. It does require a DC voltage to run, at 4.5-30VDC. It has reverse polarity protection in case you swap the power leads by accident.
These are standard 6-pin, 8-pin and 10-pin 0.1" spacing female headers...with a twist! The pins are extra long which means you can use these to stack shields! The legs are 10.5mm (0.42") long, so after the PCB thickness (1.7mm/0.07") you have a height of 8.8mm (0.35").
8 X 8 Grid bi-color LED matrix. Only 1.2" on a side, it is quite visible but not so large it won't plug into a breadboard! 128 LEDs are contained in the plastic body, 64 red 320mcd and 64 green, in an 8x8 matrix.
The TV-B-Gone kit is what you need! This ultra-high-power, open source kit version of the popular TV-B-Gone is fun to make and even more fun to use. This version can be used in both "North American/Asia" as well as "Europe/UK" areas (basically, the whole world)!
No products
Cart Check out